19.6mm CNC POM Air Nozzle with Dual O-Rings

This 19.6mm CNC POM air nozzle is for AK AEG applications that require this length and a matching physical profile. It combines a high-strength black POM body, CNC precision machining and a dual O-ring design in 5-, 10- or 20-piece pack options.

“AK AEG” is a selection direction, not a complete fit check. Verify the required 19.6mm length, compare the original nozzle using the same measurement method, and confirm the front profile, bore, rear interface and travel before ordering.

Key Decision Specifications

• Listed length: 19.6mm
• Application: AK AEG applications that require this length
• Color: black
• Material: high-strength POM
• Manufacturing process: CNC precision machined
• Seal design: dual O-ring
• Pack options: 5, 10 or 20 pieces

Why the 19.6mm Selection Matters

Nozzle length is a fit-critical specification. The listed 19.6mm value helps narrow the choice, but the front shape, internal bore, outside profile, rear interface, cylinder-head tube fit, tappet-plate movement and hop-up alignment must also match the intended assembly.

The dual O-ring design provides two sealing points at the cylinder-head interface. Final air seal, feeding and finished-build performance depend on the complete component combination, dimensions, part condition and installation; this page does not promise a measured result.

Who This 19.6mm Nozzle Is For

Choose this product when the removed nozzle or build specification calls for 19.6mm and the full profile matches. The confirmed platform direction is AK AEG applications that require this length.

If the required length is still uncertain, read the POM air nozzle guide and browse JVAN airsoft nozzles before ordering.

What to Check Before You Order

• Confirm that the original part or build specification calls for 19.6mm.
• Use the same measurement method for the original and replacement nozzle.
• Compare the front profile, internal bore, outside profile and rear interface.
• Confirm cylinder-head tube fit and free sliding movement across the full stroke.
• Confirm tappet-plate engagement, return and hop-up alignment.
• Do not choose another listed length solely because the products look similar.

Pack Options

• 5 pieces
• 10 pieces
• 20 pieces

The quantity option changes the number of nozzles supplied. It does not change the listed 19.6mm length, POM material or dual O-ring design.

19.6mm vs Other JVAN POM Nozzle Listed Values

• 19.6mm: the listed value for this product
• 21.1mm: a listed value 1.5mm higher than 19.6mm
• 21.3mm: a listed value 1.7mm higher than 19.6mm

These are differences between the listed values, not confirmed overall-length differences, performance rankings or proof of interchangeability. Compare products using the same documented measurement method, then verify the required listed length, matching nozzle profile and surrounding assembly.

Buyer Questions

What is the listed length?

The listed length is 19.6mm. Compare it with the original nozzle using the same measurement method.

Is this for AK AEG applications?

Yes, for AK AEG applications that require a 19.6mm nozzle. Verify the full profile and surrounding components before ordering.

Does the AK platform label remove the need to check fit?

No. AK AEG internal combinations can differ. Confirm length, profile, bore, cylinder-head fit, tappet movement and hop-up alignment.

What material and manufacturing process are listed?

The current product specification lists high-strength black POM and CNC precision machining.

What does the dual O-ring design mean?

The nozzle has two O-rings at the cylinder-head interface. The completed seal depends on matching dimensions, surrounding parts and installation.

Can I substitute the 21.1mm or 21.3mm product?

Do not assume the listed lengths are interchangeable. The listed values are 19.6mm, 21.1mm and 21.3mm; compare them using the same documented measurement method, then verify the required listed length, matching nozzle profile and surrounding assembly.

Verify the Length, Then Choose a Pack

Select 5, 10 or 20 pieces after confirming that the AK AEG application requires the listed 19.6mm length and the full profile matches. If the documented requirement lists 21.1mm instead, review the separate 21.1mm POM air nozzle product before ordering.